APPLICATION 
STEEL: 1、Steel surface must no oil, Sandblasting derusting shall, in accordance with the provisions of GB/T 8923 Sa2.5 level. If the limited conditions, also can remove rust, but must achieve St3 level;  Concrete application of wire brush, asking for no dust, no pollution, no water, no salt, no loose particles of concrete.
2、Coating has the correct orientation of glass flake coating, the coating when stretching as far as possible to the same direction, the correct way of coating can prolong facilities, could the mixed slurry after curing Man knife scraping wipe technology should be adopted.
①With SLVEGF 01 and 02 vinyl ester flake anticorrosive paint primer, after being dry construction
②By hand trowel scratch paint (each) 1 ~ 2 mm thick vinyl ester glass flake mortar layer, hours after the hardening, and thickness of construction according to design requirements and regulations.
③Coating surface 1~2 time with SLVEGF 01 and 02 vinyl ester flake anticorrosive coating.

SAFETY:  Pay attention to the safety precautions before and after using this product. Users
should comply with the provision of the respective country or local government. It’s
dangerous or deadly to eating it. To avoid inhalation of thinner steams and spray mists.
Use protective wears correctly; the skin and eyes should avoid contacting it. Use with good ventilation. This product is flammable. All sources of ignition must be eliminated in, or near the working area. DO NOT SMOKE. Fight fire with foam, CO2 or dry chemical powder. On burning will emit toxic fumes.

Notes: The data in the manual is get from standard experiments and may be vary from different conditions in use. Please refer to the latest manual if the data is altered and we would not inform specially.